Wallpaper - Green Congo Design

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Description:

Wallpaper design Green Congo.

Premium quality white matte non-woven wallpaper of 180gr/m2.

Printing method: Digital

Application: paper glue

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Measurement:

Width 150 cm x length 300 cm

A roll is composed of 3 panels x 3 meters long, and each panel is 50 cm wide. The total pack is 9 meters.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparation:

The base must be dry, clean, smooth and free of wallpaper and paint residues. Sand the painted surfaces with sandpaper and wash them with a suitable cleaning product. Highly absorbent substrates should be pre-treated with glue or a dry coat of primer. The base should be of a homogeneous neutral or white color. Unroll the roll and cut the strips at the marks with scissors. Then turn each strip over to wallpaper in the correct order. 

Gluing:

With a roller, apply a uniform and thin layer on the wall. It is sufficient to glue each time a width equivalent to the width of a maximum of one of the three strips. Do not allowthe glue todry before applying the strip. Make sure that the glue does not emanate between joints and remain on the front side of the paper as this can cause irregularities in the surface.

Application:

Tip: Place the mural starting from left to right, i.e. from strip 1 to the left and continue to the right towards strip 3.

Place strip 1 vertically aligned.

2. Press the paper with a clean, soft wallpaper brush.

3. Check that no air bubbles are formed.

4. Place strip 2 to the right, edge to edge with the first strip.

Attention! Removeexcess glue on the front side of the paper with a soft, damp sponge without pressing or rubbing. Avoid excessive heat or low air humidity as this may cause splicing.