Papel de Pared · Mural Sabana blanco y negro

The tree and the pastures in the savannah merge with the animals that inhabit it and become indivisible, since it is impossible to imagine one without the other, like the painter and his easel or the ink with the writer. Today we celebrate nature and the animals that nourish themselves from it; the cycle of life. The baobab, the adansonia, the epiphyte and the albizia are the frames that complete the painting of our Africa, where we can always return to recharge our batteries.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Description:

Sabana design wallpaper. 

Premium quality white matte non-woven wallpaper of 180gr/m².

Printing method: Digital

Application: paper glue

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Measurement:

Las medidas se adaptan según las necesidades. Envía tus medidas a [email protected] y te presupuestaremos el mural sin cargo.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Price:

The marked price corresponds to 1 m².

Note: as this is a product designed, adjusted and printed especially for the exact measurements of each customer, the murals are non-returnable except for manufacturing defects.

As this is a custom-made product, delivery time may be extended up to five working days in addition to the normal delivery time of our products. 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparation:

The base must be dry, clean, smooth and free of wallpaper and paint residues. Sand the painted surfaces with sandpaper and wash them with a suitable cleaning product. Highly absorbent substrates should be pre-treated with glue or a dry coat of primer. The base should be of a homogeneous neutral or white color. Unroll the roll and cut the strips at the marks with scissors. Then turn each strip over to wallpaper in the correct order. 

Gluing:

With a roller, apply a uniform and thin layer on the wall. It is sufficient to glue each time a width equivalent to the width of a maximum of one of the strips. Do not allowthe glue todry before applying the strip. Make sure that the glue does not emanate between joints and remain on the front side of the paper as this can cause irregularities in the surface.

Application:

Tip: Place the mural starting from left to right, i.e. from strip 1 to the left and continue to the right towards the last strip.

Place strip 1 vertically aligned.

2. Press the paper with a clean, soft wallpaper brush.

3. Check that no air bubbles are formed.

4. Place strip 2 to the right, edge to edge with the first strip.

Attention! Removeexcess glue on the front side of the paper with a soft, damp sponge without pressing or rubbing. Avoid excessive heat or low air humidity as this may cause splicing.